. OPERATION DETAILED CONTROLS AND GAUGES Gauges and Meter The correct level may not be displayed for a short time after the starting switch is turned to the ON position, but this is not a problem. 3 - 11 Swing Lock Monitor This monitor (2) informs th actuated. Actuated: Lights up When the swing lock swi monitor lamp lights up. When the swing holding b monitor lamp flashes. e operator that the swing lock is being tch is turned ON (ACTUATED), the rake relase switch is turned on, this REMARK The swing motor is equipp ed with a disc brake that mechanically stops the rotation. When th e swing lock monitor is lighted up, the brake remains applied.
Engine Coolant Temperatur e Gauge hts up during machine operation, the system is actuated. ntive system functions in the following p: e monitor lamp begins to flash. p: ght down to low idle, engine coolant When the red range (B) lig engine overheat preventive The engine overheat preve manner. When segment (D) lights u Engine coolant temperatur e monitor lamp begins to flash. When segment (E) lights u The engine speed is brou coolant temperature monitor lamp (F) begins to flash and the warning warning buzzer begins to sound. REMARK The engine overheat pr eventive system continues to function until the coolant temperature goes down to the level of green range (A).
Engine coolant tempera ture monitor lamp (F) stops flashing, w hen the fuel adjusting d ial is set at l ow idle , after the coolant temperature goes down to the level of gree n range (A) . unction unt If only white range (C) rem ains lit after starting the engine , warm up t he e ngine until gree n range (A) lights u Fuel Gauge This meter (4) shows the fu el level in the fuel tank. During norma operation, the lamp should light up in the green range (A) . there is If the lamp in the red range (B) flashes during operation, less than 42 liters (11.10 U S gal) of fuel remaining, so check and add fuel.
REMARK When red range (B) in the f uel gauge lights up, fuel level monitor (C) begins to flash, too.