. OPERATION DETAILED CONTROLS AND GAUGES Monitor Switches Portion (1) (2) (3) Working mode selector switch Auto-deceleration switch Travel speed selector switch (4) (5) Wiper switch Window washer switch Working Mode Selector Switch This switch (1) is used to set the power and movement of the work equipment. Operations can be carried out more easily by selecting the mode to match the type of operation. A lights up: A mode (for heavy-load operations) E lights up: E mode (for operations with emphasis on fuel economy) B lights up: B mode (for breaker operations) For details on the use of this switch, refer to the section of "WORKING MODE (PAGE 3-86)".
Auto-deceleration Switch When this auto-deceleration switch button (2) is depressed, the auto-decelerationis actuated, if the control levers are in the neutral position, and the engine speed is automatically lowered to reduce fuel consumption. The auto-deceleration lamp "ON": The auto-deceleration is actuated. The auto-deceleration lamp "OFF": The auto-deceleration is released. Every time the switch button is depressed, actuation and release alternate. 3 - 13