OPERATING THE ENGINE Using Cruise Control for Stationary PTO Operation: Engine Fan Control point, or 3) the Engine Control Unit detects that air intake temperature, oil temperature, or compression brake usage requires it. Setting Idle Speed 2. Ensure transmission is in Neutral. 1. Ensure parking brakes are applied. WARNING! 3. Engage PTO per the manufacturer's operating instructions. The engine fan can be turned ON using a switch that is mounted on the accessory switch panel. This lets you set the fan to manual or automatic operation. Do not work on or near the fan with the engine running. Anyone near the engine fan when it turns on could be injured.
If it is set at MANUAL, the fan will turn on any time the ig- nition key switch is turned to the ON position. In AUTO, it could engage suddenly without warning. Before turning on the ignition or switching from AUTO to MANUAL, be sure no workers are near the fan. Failure to comply may result in personal injury, death, equipment or property dam- age. 4. Move the ON/OFF switch to the "ON" position. With the ignition key turned ON and the fan switch in the MANUAL position, the engine fan will be ON regardless of engine temperature. 4 5. Toggle the SET/RESUME switch to obtain the desired engine rpm.
With the engine fan switch in the AUTO position, the engine fan will automatically turn ON when any one of the following conditions occur: 1) the engine coolant temperature reaches 200є F (93є C) approximately, 2) the Air Conditioning system is turned ON or has reached a set pressure (02/14) Y53-1203-1D1 4-49