GETTING TO YOUR ENGINE 1 Hood Lock Hood Pivot Lock is automatic. To deactivate the hood lock, push on the rear portion of the cylinder until the magnet attached to the cylinder. This releases the lock mechanism and allows the hood to be closed. NOTE With the lever in the open position, the Hood Lock keeps the hood from closing unexpectedly. If the Hood Lock malfunctions, have it repaired by an Authorized Service Center or Kenworth Dealer. 1 Hood Lock NOTE To close the hood, you must first push the lever against the cylinder to UNLOCK the Hood Lock. After lowering the hood, fasten the Hood Latches on each side of the hood. Device automatically locks when hood is fully opened!
Lock mecha- nism must be de-activated in order to close hood. 1-18 Y53-1203-1D1 (02/14)