OPERATING THE REAR/DRIVE AXLE equipped) are calibrated prior to putting the vehicle into service. The reason for doing this important calibration is to obtain the proper axle load distribution for the entire vehicles axles. As with the entire vehicles axles, the pusher or tag axle load cannot exceed the certified GAWR and/or the legal load limit of the axle assembly and its related components. Functionality of Auxiliary Axles installed by Kenworth WARNING! Any liftable steerable auxiliary axles installed by Kenworth will raise when the parking brake is engaged. Do not operate or park the ve- hicle with auxiliary axles in the down/loaded position when vehicle is unladen, or is being unloaded.
Raise or dump air into driver-con- trolled auxiliary axle(s) prior to un- loading vehicle. Failure to do so can result in loss of vehicle control or rollaway that may result in personal injury, death, equipment or property damage. Any liftable steerable auxiliary axles installed by Kenworth will raise when the vehicle is placed into reverse. There are three types of pusher or tag axles: Liftable/non-steerable axles do not raise when parking brake is engaged or if vehicle is in reverse. 4 Liftable/steerable (axle lift calibration required) Liftable/non-steerable (axle lift calibration required) Non-liftable (some suspensions require dump valve calibration) (02/14) Y53-1203-1D1 4-59