MAINTENANCE SCHEDULE AND LUBRICATION Table 7 Spicer Driveshaft Lubrication Intervals* 5 5-14 Y53-1203-1D1 (02/14) SERIES CITY ON-HWY LINEHAUL ON/OFF-HWY 10-Series (1480 thru 1810 & SPL-90) Slip member also requires lubrication. 5,000/8,000 mi (8,000/12,800 km) or 3 Months (whichever comes first) 10,000/15,000 mi (16,000/24,000 km) or 3 Months (whichever comes first) 10,000/15,000 mi (16,000/24,000 km) or 30 Days (whichever comes first) 5,000/8,000 mi (8,000/12,800 km) or 3 Months (whichever comes first) Spicer Life Series® - Medium Duty (SPL-55, 70 & 100) Booted & permanently lubricated slip member.
25,000 mi (40,000 km) or 6 Months (whichever comes first) 25,000 mi (40,000 km) or 6 Months (whichever comes first) 25,000 mi (40,000 km) or 6 Months (whichever comes first) 25,000 mi (40,000 km) or 6 Months (whichever comes first) Spicer Life Series® - Heavy Duty (SPL-140, 140HD, 170, 170 HD, 250 & 250 HD) Standard Spicer Life Series u-joint Booted & permanently lubricated slip member.
25,000 mi (40,000 km) or 6 Months (whichever comes first) 100,000 mi (160,000 km) or 6 Months (whichever comes first) 100,000 mi (160,000 km) or 6 Months (whichever comes first) 25,000 mi (40,000 km) or 6 Months * Spicer Driveshaft Division recommends re-lubrication with Chevron Ulta-Duty EP-2 or a compatible grease meeting N.L.G.I. Grade 2 specifications with an operating range of +325F/+163C to -10F/-23C. ** Spicer Life XL u-joints are best identified by the rubber seal guards (a soft, pliable boot) fitted to the bearing cups. Spicer Life XL u-joints have a plastic fitting cover attached prior to the required initial 350,000 mile re-lubrication.
Standard Spicer Life Series u-joints have a hard plastic slinger fitted to the bearing cups. City is defined as all applications that require a minimum of 90% of operation time within the city limits. On-Highway is defined as all applications requiring less than 10% of operating time on gravel, dirt or unpaved roads. Linehaul is defined as 100% of operation time on smooth concrete or asphalt. On/Off-Highway is defined as all applications operating primarily on paved roads, but requiring more than 10% of operating time on gravel, dirt or unpaved roads.