ELECTRICAL MAINTENANCE Adding Electrical Options WARNING! WARNING! If you are unfamiliar with proper electrical repair practices and pro- cedures, see your authorized Ken- worth dealer for assistance. NOTE Never install a circuit breaker in a circuit that is designated as “fuse- only” circuit(s). Fuse-only circuits are marked with an * on the reverse side of the Power Distribution Box cover. Using a circuit breaker in those fuse-only circuits may cause the circuit to overheat when a short exists which could lead to equipment damage and/or personal injury. Do not add a fuse with a rating higher than 30 amps.
Follow the circuit protection size/type recom- mended by the component manu- facturer. Installing a fuse or circuit breaker greater than designated may damage the electrical system which could lead to equipment dam- age and/or personal injury. NOTE Easy addition of circuits is provided by plug-in connectors that have a ground and a power wire. CAUTION For proper electrical system performance, refer to a wiring diagram for your chassis before adding electrical options. NOTE Follow all manufacturers' circuit pro- tection recommendations for the components and wires being added. Failure to comply may result in equipment damage.
Do not install a circuit breaker in place of a fuse for the following cir- cuits: 5 ACC FEED BODY IGN CAB ABS - BATT CAB ABS - IGN (02/14) Y53-1203-1D1 5-69