ELECTRICAL MAINTENANCE When charging the battery (installed in the vehicle) disconnect the battery cables. Remote Keyless Entry Troubleshooting To Synchronize a Key Fob 1. Hold the key fob near the center gauge area (middle of the instrument panel). Do not reverse the cables of the alternator, starter motor, or battery. The remote keyless entry system may become non-operational due to failure of a key fob battery. If you have issues with a key fob, replace the battery and re-synchronize the key fob. In some situations, the key fob may need to be replaced and in others, a fuse may have failed and may render both key fobs inoperative. 2.
Press either the lock or unlock button twice within 2 seconds. Do not polarize the alternator. The alternator should not be polarized like a generator. To ensure correct polarity, use a test lamp or a voltmeter. ° When the key fob is resynchronized, the doors will lock or unlock. ° If the fob fails to synchronize, it could be programmed to a different vehicle or could have failed. Contact your dealer for more help, if a key fob does not work and it is not because of a bad battery. 5 5-80 Y53-1203-1D1 (02/14)