PACCAR Inc. W900, T660, T800, C500, 963 — U-Bolt Torque

FRONT AXLE AND SUSPENSION MAINTENANCE Inspection Wheel Alignment U-Bolt Torque For all vehicles, mandatory maintenance procedures include retightening all U-bolts and inspecting the suspension for loose fasteners, abnormal wear, or damage. However, even with proper maintenance, the service life of leaf springs is affected by many factors, such as: fatigue, vehicle gross weight, type of load, road conditions, and vehicle speed. For driving safety and comfort, and to prolong the life of your vehicle, it is important to have wheels correctly aligned. Check tire wear frequently. Uneven tire wear is a sign that the wheels may be misaligned. It is important that U-bolts remain tight.

Severe use of your vehicle will cause them to loosen faster. But all vehicles need to have their U-bolts checked and tightened regularly. Be sure someone with the proper training and the right tools checks and tightens the U-bolts on your Kenworth. If you see uneven wear, take your vehicle to a Kenworth Dealer familiar with aligning wheels on Kenworth vehicles. New springs can settle in after service, relieving the tension on the U-bolts. Loose U-bolts can cause leaf spring breakage, axle misalignment, hard steering and abnormal tire wear. Check for cracks, wear marks, splits, or other defects on the surface of the spring. Defective parts must be replaced.

Because repaired springs cannot be fully restored to their original service life, replace the complete assembly if cracks or other defects are detected. All vehicles should have suspension U-bolts tightened after the first 500 miles (800 km) of operation. And re-torque the front spring pinch bolts and shackle pinch bolts. 5 Visually inspect shock absorbers and rubber bushings. (02/14) Y53-1203-1D1 5-99