TRANSMISSION AND CLUTCH MAINTENANCE Clutch Adjustment - Normal Wear External Linkage Adjustment 1. Adjust clutch to clutch manufacturer's specification. See the clutch manufacturer's Service Manual for the proper adjustment procedures. 2. Verify 1/8 in. free travel (distance the release yoke moves before the release yoke bearing pads contact the release bearing). NOTE This procedure is all that is required for normal clutch adjustment. Ad- justment of any other components is not required. 3. Verify free pedal of 1.75 in. (44 mm ± 6 mm). 5 (02/14) Y53-1203-1D1 5-141