INDICATORS 1. Anti-Lock Brake System (ABS) to Operator's Manual for "Anti-Lock Braking System" for more information.) 2. Anti-Lock Brake System (ABS), Trailer C. If your vehicle has the optional Wheel Spin Control feature, the ABS Warning Lamp turns on and stays on when a problem exists with the ATC system. This should be checked by a Kenworth dealer as soon as possible. (Refer to Operator's Manual for "Anti-Lock Braking System" for more information.) A. It illuminates during the power-on self test when the ignition is turned ON. It turns off after a few seconds if no system problems are detected. A. It illuminates during the power-on self test when the ignition is turned ON.
It turns off after a few seconds if no system problems are detected. The bulb self-test is performed whenever the ignition is turned ON, regardless of whether you have Trailer ABS. If a Trailer ABS system is detected, the lamp will turn off after a few seconds if no system problems are detected. 3 CAUTION If the ABS Warning Lamp does not illuminate during the power-on self test, there may be a problem with the light or wiring. You should have this checked as soon as possible. Fail- ure to comply may result in equip- ment or property damage. NOTE After servicing the ABS, the lamp stays on after the power-on self test. This indicates that the ABS wheel sensors have not been checked by the ABS.
As soon as the vehicle is driven at speeds above 4 mph (6 km/h) the lamp turns off, indicating that the wheel sensors have been checked by the ABS. If the Trailer ABS Warning Lamp does not turn on during the power-on self test, there may be a problem with the light or wiring. You should have this checked as soon as pos- sible. CAUTION B. If it turns on and stays on at any other time, it is indicating that a problem exists with the ABS. This should be checked by a Kenworth dealer as soon as possible. (Refer 3-34 Y53-1203-1D1 (02/14)