. OPERATION OPERATION CHECK OIL LEVEL IN ENGINE OIL PAN, ADD OIL WARNING 3 - 74 Immediately a fter the engine is sto pped, its parts and oil are still very hot, and may cause burn injury. Accordingly, wait until they have cooled down bef ore starting 1. Open th e engi ne hood cover and check the oil level with k (G) and wipe off the oil with cloth. dipstick (G). 2. Take out dipstic k (G) and wipe off the oil with 3. 4. Fully The insert dips oil level sh tick (G) into ould be bet dipstick pipe, the ween the H and L m n remove it. arks on dipstick ( I ( G). f the F). oil level is below the L mark, add oil through oil filler port 5.
I f the oil level is above the H mark, open the u nderguard of the engine, remove drain plug (1), and loosen d to drain th e exces sive oil, an d then check the oil f the oil securely REMARK When checking the oil level after the engine h as been operated, wait for at least 15 m inutes after the engine is stopped before c hecking th e oil level. horizontal before checking the oil level. If the machine is at an angl e, set the machine horizontal before c hecking the oil level.