. OPERATION OPERATION MOVING MACHINE IN REVERSE WARNING When switching between FORWARD and REVERSE, check that the new direction of travel is safe. There is a blind spot behind the machine, so use extreme caution when reversing the machine. Always stop the machine completely before shifting between FORWARD and REVERSE. 3 - 92 Operate gear s hift lever (1) to the R1 or R2 p osition , then gradually depress accele rator panel (2) to move t he m achin NOTICE cannot be driven in reverse if the dump body is raised. The machine n in revers he dum is raised. Lower the du mp body, set the dump leve r to FLOAT, then o perate the gear shift leve r to R1 or R2.
rward and Reverse, stop the machine When switchi ng between Fo and Reverse, completely an d run the engine at low idle whe n shiftin g the d irectio n of travel. After moving the gear shift le ver, do not accelerate u ntil it i s detected that the trans mission clutch is engaged. Do not operate the gear shift le ver wit h the accelerator pedal d epressed. This will caus e a big shock an d will also redu ce the service life of the machine.