. OPERATION OPERATION DUMP OPERATIONS WARNING 3 - 107 dumping operations. ks, operate the dump body slowly. ction or maintenance with the dump body When dumping large roc When performing inspe ks, operate the dump body sl ction or maintenance with raised, always use the b ody pivot pin and lock the dump lever at the IVOT PIN (PAGE 3-46)". ump lever at the HOLD position. For details, see "BODY P Operate the dump body as follows. 1. 1. Place gear shift lever (1) at N (neutral) position, and set pa rking brake switch (2) to P ARKING position. 2. Move dump lever ( 3) to RAISE position, the raise the dump body.
n depress the accelerator pedal to If the dump lever is r eleased when it is at RAIS E position , it is held at RAISE positio n and the dump body will c ontinue to rise. The dumping speed speed. increases in proportion to the engine gine 3. When the dump body rises to the previously set position, d ump lever (3) returns to H OLD position. The dump b ody is then held at that position. If it is necessary to ra ise the dump body further, operate d ump lever (3) to RAISE position and the dump bo dy will ris e. If dump lever (3) is rele ased, dump lever (3) will r eturn to H OLD position and the dum p body will stop at that po sition.
When raising the dum p body, to prevent any imp act load o n the hydraulic circuit or ho ist cylinder, let the acceler ator pedal back when the dump body approaches the maximu m tilt angle .