. MAINTENANCE SERVICE PROCEDURE CHECK BRAKING CAPACITY OF FOOT BRAKE WARNING gradually raise the move even when the lever at N (neutral) Komatsu distributor for CHECK BRAKING CAPACITY OF RETARDER BRAKE WARNING even when the engine lever at N position. If NOTICE position. 4 - 49 If the machi ne moves when the braking capacity is being checked, it may lead to serious personal i njury. If the machine moves, lower the en gine speed immediately, return the g ear shift lever to the N (Neutral) position and set th e parking brake switch to the PARKING po Check the braking capacity of the foot brak 1. Stop th 2. Set ge engine engine 3. Lower positio If any repair. 1.
Stop th e machine on flat ground and dep ar shift lever (2) to the D positi speed. If the machine does no speed reaches 1440 rpm, it is n the engine speed, set shifting n, and then set parking brake at abnormality is found, ask your NOTICE There is dan ger of damage inside the transmissio n, so always do this with the gear shift lever at "D"p osition. Do not use an y other position. If the machi ne moves when the braking capacity is being checked, it may lead to serious personal i njury. If the machine moves, lower the en gine speed immediately, return the gear shift lever to the N (Neutral) position and depr ess the foot brake. Check the braking capacity of the retarder 1.
Stop th (1) fully 2. Set ge speed. speed 3. Lower any pr e machine on flat ground and pu . ar shift lever (2) to D position, gra If the machine does not move reaches 1440 rpm, it is normal. the engine speed, set gear shif oblem is found, ask your Komats There is dan ger of damage inside the transmissio n, so always do this with the gear shift lever at "D"p osition. Do not use an y other