. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE Rear CLEAN, CHECK RADIATOR FINS AND AFTER COOLER FINS WARNING dust and debris, there is danger of injury. Always wear protective equipment such as 4 - 56 If compress ed air scattered ar protective g lasses and mask. If the radia tor fins or afterco oler fins becom e clogged o r bent, this will cause overheating of the engine. re clogged, clean the fins. Inspect th e fins. If any fins a re clogged, cl ean the fins. If any pin i repairs. s bent, please as u distributor to perform Cleanin g can be carried o ut by using jets of air, stea m, or water, but be c areful not to let th e nozzle conta ct the fin.
When u sing compressed air or steam, k eep the nozz le at a right angle to the radiator and after cooler. Examin e the rubber hose, and if any cra cks or brittle places are found, r clamps. eplace the hose. In addition, check also for loose hose n addition, ch loose hose Steam or water may be us ed instead of compressed air. However, when performing pow erful steam cleaning (high-pres sure machine was h) of the heat exchange eq uipment (radiator, aftercooler,), maint ain sufficient distance from the m achine when perf orming the ope ration.
If ste am cleaning (high-pressure machine wash) is carried out at close rang e, there is danger that the intern al fins of the heat exchange equipment may be d eformed, and this will cause earl y clogging and br eakage.