. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN FINAL DRIVE CASE WARNING 4 - 77 EVERY 2000 HOURS SERVICE Maintenance f or every 50, 250, 500 an d 1000 hours servi ce shoul d be carried out at the s ame time. Immediately the engin e is stopped and parts ar e at high temperature, and this will cause burns. Wait f or the temperature t o go down bef ore starting t he operation If there i s still pressure rema ining inside t he case, the oil or plu g may fly out. Turn the plug slowly to release the pressure , then remove it carefully Refill amount of oil: Fron t left, right 4 .0 liters (1.06 US g al) each er left, right 3.5 liter s (0.92 US gal) eac left, right 4 .5 liters (1.19 US gal) each 1.
Stop t he m achine so th at the TOP and d rain plug (P) is at the bottom. 2. again 3. Add o il through the hol e for plug (G ) to the specified l 4. After addin g oil , check t hat the oil is at the s pecified le vel. See "CHECK LEVEL IN FINAL DRIVE CASE, ADD OIL DRIVE (PAG 5. Repe at the procedure in steps 1 - 4 and change the oil to all the final d rive case s (front, center, rear ).