Komatsu — EVERY 4000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN HYDRAULIC TANK WARNING pressure plug (P), LEVEL IN HYDRAULIC TANK, ADD OIL (PAGE 3-75)". CHECK WATER PUMP Check around the water pump for water leakage. If any part is leaking, ask your Komatsu distributor for inspection/repair. CHECK FAN PULLEY AND TENSION PULLEY 4 - 84 EVERY 4000 HOURS Maintenance for every 50, 250, 500, 1000 and 2000 ho urs service should be carried out a t the same time. Immediately after the engin e is stopped, its parts and oil are still very h ot, and may cause burn inj ury. Accordingly, w ait until they have cooled down bef When removing the oil filler cap, turn it slowly to release th e internal pr Refill amount of oil:

120 l 1. Lower the dump body a 2. Turn the cap of oil fille before removing the ca 3. Taking care not to get drain the oil, then tighte 4. Pour in the specified a mount of engine oil from oil fil 5. After adding oil, check t hat the oil is at the specified details of the oil to use, see "CHECK OIL L CHECK STARTING MOT OR The brushes may be worn or the bearing may have run out of grease, ask your Komatsu distributor for inspection and repairs. uently, have this inspection performed every 1000 hours. If th e engine is started freq uently, have this inspection p erformed CHECK AIR COMPRES Ask your Komatsu distribut Check for play of the pulley and leakage of grease.

If an y problem is found, contact your K omatsu distribut