Komatsu — MACHINE MONITOR

. OPERATION EXPLANATION OF COMPONENTS MACHINE MONITOR A: B: C: Character display Caution items Emergency stop item D: E: Meter display portion Centralized warning lamp NOTICE When the engine starting switch is turned to ON position before starting the engine, a system check is carried out for 3 seconds. The centralized warning lamp is lit for 2 seconds, and then goes out. The alarm buzzer sounds for 2 seconds, and then stops. The machine monitor lamp is lit for 2 seconds and then goes out for 1 second. If there is any abnormality or if anything is operated, the respective display lamp lights up. The shift indicator displays "88" for 2 seconds and then goes out for 1 second.

After this, the speed range is displayed. After a 3-second system check, the meter starts to function. The character display shows "KOMATSU" for 3 seconds. If the lamps or any other parts do not work, it there is a probability that there is a failure in the machine monitor or disconnection of the electric wiring, so ask your Komatsu distributor to carry out inspection. If the gear shift lever is not at the Neutral position when the starting switch is turned to the ON position, when the system check is completed, the shift lever position pilot lamp will flash, the centralized warning lamp will light up, and the alarm buzzer will continue to sound intermittently.

If this happens, move the gear shift lever to the Neutral position. The shift lever position pilot lamp will display N, the centralized warning lamp will go out, and the buzzer will stop. 3 - 5 EXPLANATION OF COMPONE NTS ed for operating the machine. Th e following is an e xplanation of devices need To perform suitable operations correctly and sa fely, it is important to completel y understand methods of operating the equipment, and the meanings of the display s.