Komatsu — SWITCHES

. OPERATION EXPLANATION OF COMPONENTS EMERGENCY STEERING SWITCH WARNING the pilot lamp on the machine monitor light up. to a maximum of 5 km/h (3.1 MPH). 3 - 33 POWER MODE SELECTOR SWIT CH tch the power mode. This makes it lly in a way suited to the operating This switch (5) is used to swi possible to travel economica conditions. If portion (a) of the switch is p ressed, high-power mode pilot lamp (P) lights up and the system i s switched to the high-power mode. If portion (b) of the switch is pr essed, economy mode pilot lamp (E) lights up and the system is sw itched to the economy mode. (a): High power mode (genera l operations) g conditions ns on flat ground) Normal standard operatin (b):

Economy mode (operatio Work with emphasis on fu ground where the maximu el consumption, such as work on flat m power is not needed When the lamp switch is turn ed ON, the icon inside the switch lights up, regardless of th Do not continue to use the emerg ency steering pump for more than 90 seconds. If the emergency s teering is used continuously for more than 90 seconds, there i s danger that the pump may burn out or be damaged, or that it ma y cause a fire. This switch (6) is used to actu ate the emergency steering pump. When the switch is pressed, the emergency pump is actuated to e steering.

make it possible to operate th When the switch is ON, the p ilot lamp (red) inside the switch and When the emergency steering is being used, keep the travel speed The emergency steering is ac tuated automatically in the following When the steering hydraul When the engine has stop When the emergency steerin g is actuated, stop the machine promptly and perform insp If the starting switch is at ON position and the parking brake switch is at TRAVEL po sition when the engine is stopped, the automatic emerg ency steering is actuated after 1 second, so set the parking brake switch to PARKING position.