Komatsu — SWITCHES

. OPERATION EXPLANATION OF COMPONENTS AISS LOW SWITCH By using this switch (9), it is possible to switch the AISS freely between AUTO and LOW. Use each position as follows. (a): AUTO position For normal operations (b): LOW position When fine control of the machine is needed, such as when putting it into a garage. Regardless of the position of the switch, when the differential lock is pilot lamp lights up. 3 - 36 If the switch is at AUTO pos ition: When the machine is stop ped, if the parking brake or retarde rbrake are actuated, t he idlin g speed is automatically adjusted to low speed.

automatically adjusted to When the parking brake is released and the machine is moved off, the speed is high speed. he ove The coolant temperature is detected, and when it is at low t emperature, the idle is automatically adjusted t o high speed to reduce the war ming-up time. When the lamp switch is tur ned ON, the icon inside the switc h lights up, regardless of the position of the swi INTER-AXLE DIFFERENTIAL LO CK SWITCH This switch (10) can be use d to switch the actuating condition s for the inter-axle differential loc k. When this switch is pressed , the system is switched to MANUAL. When the switch is not pr essed or is pressed to return it, the . system is switched to AUTO AUTO:

The inter-axle differ ential lock is automatically actuate d to stabilize the machin is shifted. e when the brake is applied or the gear MANUAL: When the gear s hift lever is at the F3, F2, F1, N, R 1, or R2 position, the i nter-axle differential lock is actuated. ctuated, the When the lamp switch is tur ned ON, the icon inside the switc h lights up, regardless of the position of the swi For details when using the differential lock, see "OPERATION USING DIFFERENTIAL L OCK (PAG E 3-104