. OPERATION EXPLANATION OF COMPONENTS OPERATION EXPLANATION OF COMPONENTS When moving the shift lever from N (neutral) position to R1 DUMP LEVER CAUTION This lever (4) is used to operate the dump body. (a) RAISE (b) HOLD: The dump body stops and is held in position. (c) FLOAT: The dump body moves freely under external force. (d) LOWER Always set to FLOAT position when traveling. It is impossible to travel in reverse if the dump body is raised. (PAGE 3-89)". 3 - 44 (reverse) position or from N ( neutral) position to D position, press the lock button on the shift le When the shift hold switch i s pressed, the shift hold function is ot lamp lights up.
is actuated, the transmission is not ansmission speed. actuated and the shift hold pil When the shift hold function shifted up from the present tr The shift hold function can be canceled by performing the following operations. s operated to another position. is pressed again. 1) When the gear shift lever i 2) When the shift hold switch To prevent damage to the dump body caused by vibration from the road, always lower the dump body whe n traveling and set the dump lever to the FLOAT position. If the engine stops, the dump b ody is held in the HOLD condition, regardless of t he pos ition of the dump lever.
When the engine is started again, t he dump body is held in the HOLD condition an d the b ody pilot lamp li ghts up . For DUM CONDITION