Ditch Witch / Charles Machine Works RT40 — Chain Types

Systems and Equipment - 102 RT40 Operator’s Manual Chain, Teeth, and Sprockets p Chain, Teeth, and Sprockets Chain and Tooth Maintenance Always replace sprockets at the same time you replace the digging chain. Sprockets and chain are designed to work together. Replacing one without the other will cause premature wear of the new part. Keep digging teeth sharp. Using dull, worn teeth will decrease production and increase shock load to other trencher components. It can also cause chain stretch, which leads to premature chain wear and failure. Maintain the proper amount of tension on the digging chain. Overtightening will cause chain stretch and loss of machine performance.

For correct tightening procedure, see page 120. Use the tooth pattern most appropriate for your digging conditions. If you move to a different soil type, contact your Ditch Witch dealer for information about the most effective chain type and tooth pattern. Chain Types Chain type Features 4-pitch standard chain 2-pitch more teeth for smoother cutting alternating side bar prevents spoil compaction on chain bolt-on adapters allow easy configuration changes Shark Chain II versatile, virtually maintenance-free combination provides pick and shovel effect