Complete the Job - 106 RT40 Operator’s Manual p Restore Jobsite Restore Jobsite After product is installed, return spoils to the trench with backfill blade. Backfilling 1. Position unit at end of trench, several feet from spoils. Aim tractor at outer edge of spoils. 2. Adjust backfill blade to fit land contour. 3. Move outer edge of spoils toward trench. Take two or more passes at spoils rather than moving all spoils at once. 4. Repeat on other side of trench, if necessary. 5. Engage float and make final pass in reverse over trench. Rinse Equipment Spray water onto equipment to remove dirt and mud. NOTICE: Do not spray water onto operator’s console. Electrical components could be damaged.
Wipe down instead. Stow Tools Make sure all tools and accessories are loaded on trailer. CMW