Service - 108 RT40 Operator’s Manual p Service Precautions Service Precautions Incorrect procedures could result in death, injury, or property damage. Learn to use equipment correctly. NOTICES: Unless otherwise instructed, all service should be performed with engine off. Refer to engine manufacturer’s manual for engine maintenance instructions. Before servicing equipment, lower unstowed attachments to ground. Welding Precaution NOTICE: Welding can damage electronics. Disconnect battery at battery disconnect switch before welding to prevent damage to battery. Do not turn off battery disconnect switch with engine running or alternator and other electronic devices may be damaged.
Connect welder ground clamp close to welding point and make sure no electronic components are in the ground path. Always disconnect the ECU ground connection from the frame, harness connections to the ECU, and other electronic components prior to welding on machine or attachments. Cleaning Precaution NOTICE: When cleaning equipment, do not spray electrical components with water.