RT40 Operator’s Manual Service - 119 10 Hour p Check Digging Chain 1 2 3 t14om030h.eps Check teeth (1) for wear every 10 hours. Replace worn teeth, using Ditch Witch replacement parts and maintaining original tooth pattern. Check chain every 10 hours. Replace worn or broken chains. If sidebars (2) are bent or loose on chain pins (3), chain spacers should be used to join sidebars. For more efficient digging, contact your Ditch Witch dealer for information about the tooth pattern best suited to your jobsite, or see page 102. IMPORTANT: If using rock chain bits, check that bits rotate freely. Clean chain and check bits after each use.
Replace bit when carbide cap or insert is worn or adapter can be damaged.