Ditch Witch / Charles Machine Works RT40 — Trencher

RT40 Operator’s Manual Service - 137 As Needed p Trencher Replace Digging Chain Visually check digging chains for wear on rollers and sidebars (2). Check pins (3) and bushing wear by measuring distance between chain pins and comparing it with a new chain. Also check digging teeth (1). IMPORTANT: Replace sprockets when a new chain is installed. To remove chain: 1. Fasten and adjust seat belt. 2. Start tractor. See page 62 for proper start-up procedures. 3. Move attachment direction/speed control until digging chain connector pin is on top of boom. 4. Lower boom to ground. 5. Engage parking brake. 6. Turn ignition switch to STOP. 7. Roller booms:

Secure chain by clamping links on either side of connector pin with chain jaws (shown). Squeeze jaws to reduce pressure on connector pin. Sprocket booms: Lock rear idler sprocket. t12om089h.eps