RT40 Operator’s Manual Controls - 27 Center Console p CMW Item Description Notes 2. Drilling attachment control c00ic218h.eps To rotate clockwise, press top. To rotate counterclockwise, press bottom. IMPORTANT: Always rotate clockwise during drilling and backreaming. Rotate counterclockwise only to dislodge a dry bore bit or reamer that has siezed in the bore hole. For more information about drilling attachment, see page 95. 3. Horn To sound horn, press. 4. Ignition switch To start engine, insert key and turn clockwise. To stop engine, turn counterclockwise. IMPORTANT:
If engine does not start on first attempt, check that all interlock requirements have been met, return switch to STOP, and try again. 5. Ground drive foot control To move tractor forward, push top of pedal. To move tractor backward, push bottom of pedal. To increase speed in either direction, push pedal farther from center. To stop, release pedal.