Ditch Witch / Charles Machine Works RT40 — Procedure

RT40 Operator’s Manual Transport - 69 Tow p Tow Incorrect procedures could result in death, injury, or property damage. Learn to use equipment correctly. Under normal conditions, tractor should not be towed. If tractor becomes disabled and towing is necessary: Do not tow for more than 200 yd (180 m). Tow at less than 1 mph (1.6 km/h). Use maximum towing force of 1.5 times unit weight. Procedure Incorrect procedures could result in death, injury, or property damage. Learn to use equipment correctly. 1. Attach tow line to all available tiedown points facing towing vehicle. 2. Bypass hydraulic system. Remove tunnel cover and loosen bypass valve two turns. Valve is on left rear of front pump. 3.

Fasten seat belt. 4. Disengage parking brake. 5. Check that ground drive and attachment speed/ direction controls are in neutral position. t14om051h.eps CMW