Ditch Witch / Charles Machine Works RT40 — Setup

Trench - 72 RT40 Operator’s Manual p Setup Setup EMERGENCY SHUTDOWN - Turn ignition switch to STOP. Crushing weight could cause death or serious injury. Use proper procedures and equipment or stay away. NOTICE: Use attachments or counterweights to make front and rear loads balance when all attachments are raised. Contact your Ditch Witch dealer about counterweighting for your equipment. Jobsite hazards could cause death or serious injury. Use correct equipment and work methods. Use and maintain proper safety equipment. NOTICE: Comply with all utility notification regulations before digging or drilling. Incorrect procedures can result in death, injury, or property damage.

Learn to use equipment correctly. 1. Fasten and adjust seat belt. 2. Start tractor. See page 58 for start-up procedures. 3. Drive to starting point. Move in line with planned trench. See page 60 for operating procedures. 4. Lower backfill blade. 5. Engage parking brake. 6. Lower boom to just above ground. 7. Check that attachment speed/direction control and ground drive controls are in neutral. 8. If equipped with combo, move selector valve to trenching position. 9. Check that boom is in line with planned trench. CMW