Ditch Witch / Charles Machine Works RT40 — Operating Tips

RT40 Operator’s Manual Trench - 75 Operating Tips p Operating Tips Operate engine at full throttle. Sight along center of hood to a stake driven beyond end of trench line for straight trench. Use correct length boom. See your Ditch Witch dealer for more information. Do not make sharp turns. Lower boom to full depth when turning. If an object becomes lodged in chain, move attachment speed/direction control to neutral and raise boom slightly. Reverse chain direction. If object must be removed manually, turn engine off and engage parking brake. Always start trenching with attachment speed set at low. If soil conditions permit optimum digging at higher speeds, select high.

When cutting asphalt, start trench in soil at edge of road and use shortest possible boom at full depth. For optimal spoils delivery, adjust the auger positions forward or backward to accommodate terrain and digging depth. Before operating booms equipped with rock chains, check bits for free rotation. Tap bits lightly with a hammer and turn by hand. If bits are stuck, remove and clean packed soil from bit block. Carbide bits are recommended for cutting abrasive material, such as sandstone or frozen sands or gravels. CMW