MAINTENANCE MAINTENANCE PROCEDURE 5. When installing, bring the packing surface into contact with the seal surface of the filter holder, then tighten a further 3/4 - 1 turn. q When using a filter wrench for tightening, be extremely careful not to damage the filter or cause dents. 6. After replacing the filter cartridge, add engine oil through oil filler port (F) so that the oil level is between the H and L marks on dipstick (G). 7. Run the engine for a short time at low idling, then stop the engine. Check that the oil level gauge is between the H and L marks. For details, see "Check Oil Level In Engine Oil Pan, Add Oil (3-76)". 4-61