DETAILED CONTROLS AND GAUGES OPERATION Monitor Switches Portion 3 E(1) Working mode selector switches (basic switches) E(7) No function E(2) Auto-deceleration switch (selection switch) E(8) Return switch E(3) Travel speed selector switch E(9) Up switch E(4) Wiper switch E(10) Down switch E(5) Window washer switch E(11) Input confirmation switch E(6) Maintenance switch E(12) LCD monitor adjustment switch Working Mode Selector Switch (Basic Switch) This switch (1) is used to set the movement or power for the work equipment. Operations can be carried out more easily by selecting the mode to match the type of operation. A mode: For heavy-duty operations E mode:
For operations prioritizing fuel consumption Heavy-duty lift mode: For operations where boom lifting power must increase when raising boom independently q When the engine is started, the working mode is set automatically to A mode. When the switch is pressed, it is possible to select the other modes. The monitor display on the monitor display portion (A) changes for each mode. q If it is desired to have the working mode set to start automatically in E, L, or B mode (default options setting), please ask your Komatsu distributor to change the setting. 3-18