Komatsu — SWITCHES

OPERATION DETAILED CONTROLS AND GAUGES SWITCHES 3 (1) Starting switch (10) Emergency pump drive switch (2) Fuel control dial (11) Swing brake cancel switch (3) Cigarette lighter (12) Revolving warning lamp switch (4) Swing lock switch (13) Lower wiper switch (5) Lamp switch (machines with fixed front window cab) (6) Alarm buzzer stop switch or Large capacity airflow condition blower switch (7) Machine push-up switch (if equipped) (8) Horn switch (14) Step light switch (9) Room lamp switch (15) One-touch power max. switch Starting Switch This switch (1) is used to start or stop the engine. (A): OFF position The key can be inserted or withdrawn.

The switches for the elec- tric system except the room lamp, are all turned off and the engine is stopped. (B): ON position Electric current flows in the charging and lamp circuits. Keep the starting switch key at the ON position while the engine is running. (C): START position This is the engine-start position. Keep the key at this position during cranking. Immediately after starting the engine, release the key. It will automatically return to the ON position (B). (D): HEAT (preheat) position When starting the engine in winter, set the key to this position. When the key is set to the HEAT position (D), the pre-heating monitor lightsup.

Keep the key at this position until the monitor lamp flashes.Immediately after the pre- heating monitor flashes, release the key. The key automatically returns to the OFF position (A). Then, start the engine by turning the key to the START position (C). 3-27