Back-Up Camera Controls and Operation 1 NOTE: camera 2 3 4 5 LCD Monitor (located in bulkhead above passenger seat on E-450 or in dash area on passenger side of F-550) Back-Up Camera (located on rear of vehicle) Monitor Controls System Operation 1. Power Button , glows dimly when system is connected fully manual, be- coming bright upon activation 2. A/B input Select Button , toggles active display between AV1 and AV2 inputs 3. Day/Night Mode Button , toggles intensity of LCD screen for day or night operation, (day=maximum intensity, night=less intensity) 4. Picture Adjustment Menu Button , accesses on-screen-display, to adjust (brightness, contrast, color, tint).
Use the Volume control to adjust each up or down, as indicate by a bar graph at bottom on screen. 5. Volume Button , controls +- output volume of built-in speaker, when feature is connected. Also used in Picture Adjustment Mode. This system consists of two major components: 1. The Back-Up Camera 2. LCD Monitor The system may be connected two ways: 1. Fully manual , requiring the power button on the LCD Monitor to be pushed to energize the system and activate the monitor. 2. Automatic , which activates the monitor when- ever the ignition is turned to accessory or the engine is started.
SEE MANUFACTURERS LITERATURE FOR ADDITIONAL INFORMATION Krystal Enterprises RETURN TO MENU 31 e image r, push back of