Bus Passenger Seating - Moving or Adding Krystal Enterprises RETURN TO MENU 35 Bus seating is mounted into the fl oor of the vehicle as shown in the photo to the left. To move or add seating: 1. Remove the black plastic track cover, so the track is exposed. 2. Next remove the nut from the base. NOTE: Nut must be perpen- dicular to the track when the seat is re-attached to the seat track. CAUTION: Bolts must be torqued to 35 ft.. Lbs. Caution: When Adding Seating, Do Not Exceed Weight Distribution/ Payload Limitations. Caution: When Adding Seating, Do Not Exceed Weight Distribution/ Payload Limitations.