1-7 SCHEDULED MAINTENANCE CHECKING ENGINE OIL LEVEL 1. Check that the oil level is between MIN and Max marks on the engine oil level gauge. MIN MAX 2. If the oil level is below mark, add oil until the level is within the specified ranges. MIN 3. Check the engine for oil contamination and viscosity and replace if necessary. L4GC210A REPLACING ENGINE OIL 1. When cooling the engine, warm up the engine up to the normal temperature. 2. Stop the engine. 3. After removing the oil filler cap, oil filter, and drain plug, drain the engine oil. 4. Tighten the drain plug to the specified torque(3.5~4.5kg · m). CAUTION When installing the drain plug, always use a new plug gasket. L4GC211A 5.
Pour new engine oil to the oil filler. CAUTION Over replenishing can happen oil saturation and overpressure. 6. Close the oil filler cap. 7. Run the engine. 8. Stop the engine and after checking the oil level, add oil if necessary. Oil capacity (including filter) 4.0