GENERAL 2-5 Description Specification Limit CONNECTING ROD BEARING Oil clearance Under size 0.024 ~ 0.044 mm 0.25, 0.50, 0.75 CRANKSHAFT Pin O.D Journal O.D Bend Out-of cylindricity of journal and pin End play Under size of pin 0.25 0.50 0.75 Under size of journal 0.25 0.50 0.75 45 mm 57 mm Less than 0.03 mm Less than 0.01 mm 0.06 ~ 0.260 44.725 ~ 44.740 mm 44.475 ~ 44.490 mm 44.225 ~ 44.240 mm 56.727 ~ 56.742 mm 56.477 ~ 56.492 mm 56.227 ~ 56.242 mm OIL PUMP O.D-to-front case clearance Front side clearance Tip clearance Outer gear Inner gear Oil pressure (Oil temperature 90°C~100°C) at idle (800rpm) 0.12 ~ 0.185 mm 0.025 ~ 0.069 mm 0.04 ~ 0.09 mm 0.04 ~ 0.085 mm 1.7kg/cm2 RELIEF SPRING Free height Load 43.8 mm 3.7kg/40.1 mm Cooling type Water-cooled forced circulation system, Mechanical cooling pan Water pump type Thermostat type Antifreeze viscosity Centrifugal impeller Wax pellet type with jiggle valve 40% THERMOSTAT Valve open temperature Fully open temperature 82°C 1.5°C 95°C WATER TEMPERATURE SENSOR Type Resistance(at 20°C) 2.31K ~ 2.59K