COOLING SYSTEM 2-59 REMOVAL 1. Check each part for crack, damage, and wear and replace the water pump if necessary. 2. Check the bearing for damage, abnormal noise and bad rotation and replace the water pump if necessary. 3. Check the seal unit for leak and replace the water pump assembly if necessary. C L4GC093A INSTALLATION 1. Clean the gasket surface of the water pump body and cyl- inder block. 2. After getting water around new O-ring, install it the groove in the coolant intake pipe front end. Do not apply oil or grease to the O-ring. 3. Install a new water pump gasket and water pump assembly. Tighten it to the specified torque. WATERPUMP AND CYLINDER BLOCK L4GC094A 4.
Install the timing belt tensioner and timing belt. Adjust the timing belt tension and install the timing belt cover. 5. After installing the water pump pulley and driving belt, ad- just the belt tension. 6. Add the standard coolant. 7 . Run the engine and check for leak. A 2.0 ~ 2.7 kg·m B 2.0 ~ 2.4 kg·m