INTAKE AND EXHAUST SYSTEM 2-67 REMOVAL 1. Disconnect the map sensor and the connector. 2. Disconnect the air hose from the throttle body. 3. Remove the accelerator cable. 4. Remove the P.C.V valve hose. 5. Disconnect the vacuum hoses. 6. Disconnect the fuel injector connector and the wiring harness. 7. Remove the delivery pipe with the fuel injector attached. CAUTION When removing the delivery pipe, take care not to drop the injector. 8. Remove the intake manifold stay. 9. Remove the intake manifold and gasket. L4GC105A INSPECTION 1. Intake manifold Check each component for damage and crack. 2. Air hose Check each component for damage and crack.