Maintenance—Every 500 Hours Replace Winch Oil Filter—If Equipped T118733B —UN—03DEC98 T118732C —UN—16DEC98 Winch Shown Removed for Clarity of Photo 1. The winch oil filter is located on right side between winch and crawler (A). Winch Oil Filter Location 2. Remove three cap screws from oil filter access cover. NOTE: The filter canister has a recessed 1/2 in. drive on bottom to assist removal of filter. T133718E —UN—30AUG02 3. Remove oil filter access cover. 4. Remove filter (B) by turning counterclockwise. 5. Apply a thin film of oil to gasket of new filter. 6. Install new filter. 7. Install oil filter access cover with three cap screws. Dipstick Fill Port 8. Check winch oil.
See Check Winch Oil—If Equipped. (Section 3-4.) A—Oil Filter Location B—Filter C—Dipstick Fill Port HG31779,00000CE -19-05FEB13-1/1 3-7-7 070813 PN=108