Safety—Operating Precautions Start Only From Operator's Seat Avoid unexpected machine movement. Before starting engine, sit in operator's seat. Ensure park lock lever is in position. T133715 —UN—15APR13 Never attempt to start engine from the ground or tracks. Do not attempt to start engine by shorting across the starter solenoid terminals. TX03768,0000B71 -19-03NOV08-1/1 Prevent Unintended Machine Movement (LOCKED) UP POSITION Always move the park lock lever to the “lock” position before leaving the operator's seat for any reason . Be careful not to accidentally actuate controls when co-workers are present. Engage park lock and lower work equipment to the ground during work interruptions.
Stop the engine before allowing anyone to approach the machine. Follow these same precautions before standing up, leaving the operator's seat, or exiting the machine. T159027 —19—30AUG02 (UNLOCKED) DOWN POSITION TX03768,0000B72 -19-01MAY01-1/1 Avoid Worksite Hazards Avoid contact with gas lines, buried cables and water lines. Call utility line location services to identify all underground utilities before starting work. T192984 —UN—26AUG03 T141904 —UN—15MAY01 Prepare worksite properly. Avoid operating near structures or objects that could fall onto the machine. Clear away debris that could move unexpectedly if run over.
Avoid boom or attachment contact with overhead obstacles or overhead electrical lines. Never move machine closer than 3 m (10 ft) plus twice the line insulator length to overhead wires. Keep bystanders clear at all times. Keep bystanders away from raised booms, attachments and unsupported loads. Avoid swinging or raising booms, attachments, or loads over or near personnel. Use barricades or a signal person to keep vehicles and pedestrians away. Use a signal person if moving machine in congested areas or where visibility is restricted. Always keep signal person in view. Coordinate hand signals before starting machine. Operate only on solid footing with strength sufficient to support machine.
Be especially alert working near embankments or excavations. Avoid working under over-hanging embankments or stockpiles that could collapse under or on machine. snow removal or clearing mud, dirt, etc.). At high speeds hitting obstacles (rocks, uneven concrete or manholes) can cause a sudden stop. Always wear your seat belt. Reduce machine speed when operating with tool on or near ground when obstacles may be hidden (e.g., during AM40430,0000098 -19-15JUN10-1/1 1-3-1 070813 PN=21