Precautions for maintenance SAFETY Safety instructions Two workers for maintenance when engine is running 0. To prevent injury, do not carry out maintenance with the engine running. If maintenance must be carried out with the engine running, carry out the operation with at least two workers and do as follows: One worker must always sit in the operator’s seat and be ready to stop the engine at any time. All workers must maintain contact with the other workers. When carrying out operations near the fan, fan belt, or other rotating parts, there is a hazard of being caught in the parts, so be careful not to come close. Never drop or insert tools or other objects into the fan or fan belt.
Parts may break or be sent flying. Set safety lock lever (1) to the LOCK position to prevent the work equipment from moving. Then pull parking brake lever (2) to the position to prevent the machine from moving. Do not touch any control levers. If any control lever must be operated, give a signal to the other workers to warn them to move to a safe place. Free Lock 9EA04394A Lock Free 9EA04395A Inspection and maintenance after turning E.C.S.S. switch OFF 0. For machines equipped with a E.C.S.S. lower the bucket to the ground, turn the E.C.S.S. switch OFF, and stop the engine before starting inspection or maintenance. NEVER turn the switch ON during inspection or maintenance. Proper tools 0.
Use only tools suited to the task and be sure to use the tools correctly. Using damaged, low quality, faulty, makeshift tools or improper use of the tools could cause serious personal injury. 2-30 WA250PZ-5 – VEAM945101