Komatsu — SHIFTING GEAR

. OPERATION OPERATION be 3 - 87 SHIFTING GEAR s. ic transmission, so set gear shift When s hifting gear, do as follow This m achine has an automat lever (1) to the desired pos automatically shift to a position ition, and the transmissio to match the travel speed. n will When t he dump body has risen , the speed range is locked t o 2nd speed at the D position and 1st speed at the 5 - L position. While travelin g, lower the dump body. NOTICE shifting between FORWARD and REVERSE, stop the machine When chine completely, and run the engine a t low idle when shifting the lever. After movi ng the gear shift lever, do not depress the accelerator until you ch has engaged.

detec t that the transmission clut Do no t operate the gear shift leve r with the accelerator pedal depressed. This will cause a big shock, and will also reduce the service life of the mach ine. SHIFTING UP 1. When accelerator pedal (2 machine, the lockup clutch i to direct drive. 2. If the machine is accelera automatically shift up. ) is depressed to accelerate the 1. Wh ma to d 2. If t aut . Wh chine, the lockup clutch i s engaged to shift the transmission irect drive. he machine is accelera ted further, the transmission will . If t omatically shift up. SHIFTING DOWN If accelerator pedal (2) is rele ased, the machine speed w If reduce d, and the transmission will automatically shift down.

DOWN SHIFT INHIBIT If t he sh ift lever is operated whe n the machine is traveling, a nd the travel speed is faster tha n the maximum speed fo r eac h gear position, the trans mission is not shifted immediately but is shifted down when the travel speed drops This pr events overrunning of th e engine.