Komatsu — EVERY 250 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHECK BRAKING CAPACITY OF RETARDER BRAKE WARNING CHECK BRAKING CAPACITY OF PARKING BRAKE WARNING CHECK WEAR OF PARKING BRAKE PADS WARNING 4 - 52 If the machine mo ves, it will lead to serious injury or death. If machine begins to move during the in spection of braking ca pacity lowe r the engine speed immediately, set g ear shift lever at N position, and then depress the foot b Check t he braki ng capacity of the reta rder brake as follows . 1. 2. 3. Set the air p ground, and ressure to the maxim pull retarder lever (1) um with the machine on flat fully. Set shift lev er (2) to the D position , gradually raise the engine speed.

If th speed reac e machine does not m hes 1200 rpm, it is nor ove even when the engine mal. r shift lever at N position. If 3. Lower the e ngine speed, set gea position If any problem is found, ask your Ko matsu distributo r for repair. If the machine mo ves, it will lead to serious injury or death. If machine begins to move during the in spection of braking ca pacity lowe r the engine speed immediately, set g ear shift lever at N position, and then depress the foot b rake. Check t he braki ng capacity of the par king brake as follows . 1. 2. 3. 1. Set the air p ressure to the maxim um with the machine on flat ground, and set parking brake val ve lever (1) to the PARKING position. 2.

Set shift lev er (2) to the D position , gradually raise the engine speed. If th e machine does not m ove even when the engine mal. r shift lever at N position. If engine speed reac hes 1200 rpm, it is nor 3. Lower the e ngine speed, set gea position If any problem is found, ask your Ko matsu distributo r for repair. Neve r pu t any oil or grease on the surface of the pad or disc. Measur e the thi ckness of the pad, and if it is less than 1. 5 m m (0.06 in), contact you