. MAINTENANCE SERVICE PROCEDURE REPLACE FUEL FILTER CARTRIDGE WARNING Prepare a filter wrench 4. Clean the filter holder. 4 - 62 EVERY 1000 HOURS SE Maintenance for every 50, 10 0, 250 and 500 hours service shoul d be carried out at the Immediately after the engine i s stopped, all parts are at high temperature, so do not replace th Wait for the engine to cool do The inside of fuel piping syste m of the engine is under high-pressure when the engine is runni ng.
When replacing th e filter, wait for at least 30 seconds af ter the engine stops to let the internal pr essure go down before r Do not bring any fire or spark Be careful when opening the air bleed plug at the fuel filter head and the air bleeder of the sup ply pump. The system is still under pressure and fuel may spurt out. NOTICE Genuine Komatsu fuel filter c artridges use a special filter that has hi ghly efficient filtering abi lity. When replacing th e filter cartridge, always use a genui ne Komatsu part. The common rail fuel injectio n system used on this machine consists of more precise parts th an the conventional in jection pump and nozzle.
If any part other than a genuin e Komatsu filter cartridge is used, dust o r dirt may get in and cau se problems with the in jection system. Always avoid using s ubstitute parts. When carrying out inspection or maintenance of the fuel system, pay more attention than norm al to the entry of dirt. If dirt is stuck to any part, use fuel to wash it off completely. 1. Close supply valve (1) of 2. Set the container to catch the fuel under the filter cartridge. 3. Using a filter wrench, turn to remove it. filter cartridge (2) counterclockwise