Komatsu — EVERY 2000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN FINAL DRIVE CASE WARNING CHANGE OIL IN DIFFERENTIAL CASE WARNING 4 - 72 The parts and oil a re at high tempera ture after the engine is stopped, and may cause serious burns. Wait for the temperature to go dow n before starting the opera If there is still pressure r emaining ins ide the case, t he oil or plug may fly out. Turn the plug slowly to re lease the pressure, then remove it carefully Refill ca pacity: 1 3 liters (3.43 US gal) for eac h (left a nd right) 1. Stop th e machi ne s o that castin g line (1) is h orizonta l and drain plug (P ) is at th 2. Remov plug again. 3. Add oil through the hole for plu g (G) to the specifie d level 4.

After a dding oil , check that the oil is at the s pecified level. See "CHEC K OIL 4-44)". LEVEL IN FINAL DRIVE CASE, ADD OIL ADD (PAGE The parts and oil a re at high tempera ture after the engine is stopped, and may cause serious burns. Wait for the temperature to go dow n before starting the opera tion. If there is still pressure r emaining ins ide the case, t he oil or plug may fly out. Turn the plug slowly to re lease the pressure, then remove it carefully . Refill ca pacity: 4 5 liters (11.88 U 1. Remov e drain plug (P), drain the oil, then tighten the plug through the hole for plug (G) to the specified level. plug again. 2.

Add oil through the hole for plu g (G) to the specifie d level 3. After a dding oil , check that the oil is at the s pecified level. See "CHEC K OIL LEVEL IN DIFFERENTIAL CASE, ADD OIL CASE, ADD (PAGE 4-44)".