. SAFETY GENERAL PRECAUTIONS ACTION IF FIRE OCCURS If a fire occurs, escape from the machine as follows. Turn the start switch OFF to stop the engine. Use the handrails and steps to get off the machine. 2 - 14 Fire caused by accumulat s, chips, pieces of paper, dust, or any other flamma ble materials accumulated or affixed aust manifold, muffler, or battery, or i Fire coming from electric wiring ctrical system can cause fire. c wiring connections clean and securely tightened. Short circuits in the ele Always keep electri Check the wiring ev or replace any dam c wiring connections clean and secure ery day for looseness or damage. Tigh ten any loose connectors o r wiring clamps.
Repair aged wiring. Fire coming from hydraul ic line and tube clamps, guards, and cushions are securely fixed in position. Check that all the hose If they are loose, they hoses, and cause high and tube clamps, guards, and cushio ns are secure ly fixed in pos may vibrate during operation and rub a gainst other p arts. This may lead to damage to the -pressure oil to spurt out, leading to fir e damage or serious injury. Explosion caused by ligh ting equipment el, oil, battery electrolyte, window washer fluid, or coolant, always use lighting with ifications. If such lighting equipment is not used, there is danger of explosion that may .
When checking fu anti-explosion spec cause serious injury When taking the ele ctrical power for the lighting from the m achine itself, f ollow the instr uctions in this m anual. WINDOW WASHER LIQUID Use an ethyl alcohol bas Methyl alcohol base was her liquid may irritate your eyes, so do PRECAUTIONS WHEN USING ROPS (Roll Over Protective Structure) Install ROPS when working in places where there is danger falling rocks, such as in mines and quarries, or in places whe there is danger of rolling over. If ROPS is installed, do not remove it when operating t machine.
ROPS is installed to protect the operator when machine ro Install ROPS when work falling rocks, such as in there is danger of rolling If ROPS is installed, machine. ROPS is installed to p over. When machine r absorbs its impact ene olls over, ROPS supports its weight a If ROPS is modified, modifying, consult you If ROPS is deformed b y falling objects or by rolling over, its strength lower gn functions can not be maintained. In this ca se, be sure to ask your Komatsu distri butor about re pair method. Even when the ROPS is i nstalled, if you do not fasten your seat b elt securely, it cannot prote ct you properly. Always fasten your seat belt whe n operating the machine.