Komatsu — MACHINE MONITOR

. OPERATION EXPLANATION OF COMPONENTS (1) User code display WARNING 3 - 6 USER CODE DISP LAY If any failure has occ urred on the machine, or it is nec essary to carry out inspection and mainte nance, a user code indicating the approp riate action is displayed on user code display (1). If the us er code is "02 - 0 7", the alarm b uzzer will sound intermitten tly, the monitor indicating the location of the problem will light up or flash, and the central sh. will entral warning lamp also fla If user code 02 or 04 is d isplayed, stop the machine immedia tely. See "SERVICE CODE ( PAGE 3-130)", and check the service code number.

Contact Komat su distributor, telling them the serv ice code number, for repai If "E-" and any user c ode between "01 - 07" are displa yed in turn on user code display (1), stop the machine, c heck the user code, then t ake the corrective action given User codes 02: Park the machine at a safe location and contact your Komatsu distributor 04: Carry out an eme rgency stop. Stop the engine a nd contact your Komats 01: Carry out inspect ion and maintenance after com pleting operation or whe n changing opera 03: Operate the mac hine at low travel speed and run the engine at low spee 05: Stop the machine . Run the engine at a mid-rang 06: Start the engine again and run it at idling for a sh 07:

Do not raise the