. OPERATION EXPLANATION OF COMPONENTS STARTING SWITCH 3 - 25 This switch (1) is use d to start or stop the engine ON position In this position, elect circuits. ric current flows in the charging and lamp ch key at the ON position while the engine is ting switch ON or OFF, if the starting switch between ON and OFF, the controller may m. If this happens, return the starting switch hen operate it as usual to the ON position. e starting switch is turned to the ON position, preheating is a Keep the starting swit running. When turning the star ting switch ON or OFF, if t he startin g switch is held at a position between ON and OFF, th e control ler may detect this as a proble m.
If this happens, return t he startin g switch to the OFF position, t hen operate it as usual to t he ON po sition In cold weather, if th e starting switch is turned to the O N position preheating monitor lig hts up. After the preheatin g is completed , the monitor goes out The key can be inserte d or with drawn. The switch es for the electric system are all turned off and the engine is stopp START position This is the engine-star t position. Keep the key at t his positi on during cranking. Immedia tely after starting the engine release the key. It will automatically return to the ON position.
LAMP SWITCH This switch (2) lights u p the head lamps, side cle arance la mps, tail lamps, machine moni tor lighting, and rear lamps Position 1: OFF Position 2: Side clear ance lamps, tail lamps, rea r lamps, machine monitor lig hting light up Position 3: The head l amps light up in addition to the lam ps in t he 2 position The lamp switch can be operated regardless of the position of the TURN SIGNAL LEVER s the turn signal lamp. e lever forward lever back This lever (2) operate 1: Right turn: Push th 2: Left turn: Push the When the lever is ope rated, the turn signal pilot l amp also flashes. The lever is automat ically returned when the s teering wheel turned back.
If the lev er does not return, move it by hand.